6+8Pin PCI-e Modular Cable

From £30.00

Paste the DIRECT LINK URL here, along with your PUREsleeve® colour selection.

PCI-e Clip Orientation: Inside or Outside of Curve? Please add links to Motherboard & GPU.

Quantity

PLEASE READ INFORMATION BELOW BEFORE ORDERING!!

Please note, our custom cables are made to order and the current crafting period is up to three or four weeks, this depends on how busy we are at the time of ordering. If orders are completed early, we will ship before the end of the crafting period once we have tested the cables. Once these custom cables have been made, returns will not be accepted as per our terms and conditions HERE.

VERY IMPORTANT: When measuring your required cable lengths, please take into acount for bends/curves and then add an extra 10cm to the length as it's best to have too much than not enough.

PCI-e Cable Clip Orientation: - Due to different orientations of Graphic Cards/GPU's, the direction/orientation of the connector clip will be different. This information is important as our wire comes off a coil and is naturally curved. For best results, the clip could either be on the inside or outside of the wire curve when plugged into your Graphics Cards/GPU's. Please put this information, and any other details, into the text box on this order page so we can craft your PCI-e cables correctly for you. RorzCustomPC will NOT be held liable for incorrect clip orrientations as this is up to the customer to give us this information.

Our cables sets can be made for the following PSU's listed below:

NZXT: C Series PSU's
Silverstone 2nd Gen: Strider Series/ SX800-LTi/ SX700-PT
Silverstone 3rd Gen: SX1000 Platinum/ SX750 Platinum
Corsair Type 3: AXi EXCLUDES 1600W PSU AS IT'S TYPE 4/ HXi/ HX Gold/ RM-Yellow Label
Corsair Type 4: AX1600i/ RMi/ RMx/ SF/ HX Platinum/ RM-Black Label
EVGA: SuperNova G+/G2/G3/G5/ GA/ B3/B5/ P2/ T2/ GM SFX
Seasonic: Focus & Prime Series/ M12II EVO
ASUS: ROG Thor & Strix Series
Phanteks: Revolt-X & Revolt Pro Series/ AMP

You can create your cable pattern HERE and choose your PUREsleeve® Sleeving colours HERE. Paste the DIRECT LINK URL of your pattern into the text box above, along with the names of the PUREsleeve® colours you have chosen.