PUREshrink™ Clear Heatshrink 3:1 Single-Wall Tubes

Our Clear heatshrink is used for melting ends of Sleeved wires, finishing off SATA Cables and wire spliced joints!
 
Sold Pre-cut to 15mm lengths or Per-meter in Clear.
 
Our high quality Clear PUREshrink™ heatshrink is great for doing heatshrinkless Modular and Extension cable sets. You can use them with new or existing custom cable projects. They are easy to use, just slide the 15mm length tube over your sleeving and gently apply heat to the desired location. Once done, use your wire cutters to grab the end and pull gently over the terminal away from your direction. That's it, you're done!
 
PLEASE NOTE: When using any open flame, you should always take extra care to not burn or injure yourself whilst doing the heatshrinkless process. 
 
PUREshrink heatshrink: Single-Wall 3:1 Shrink Ratio Tubing (NO ADHESIVE)
As Supplied Inside Diameter: 6mm (Can be stretched to 10mm)
After Recovery Inside Diameter: 2mm
After Recovery Total Wall Thickness: 0.60 ± 0.15
 
SPECIFICATIONS:
MATERIAL: POLYOLEFIN (CROSSLINKED)
FEATURE: HALOGEN FREE FLAME RETARDANT
VOLTAGE: 600 V
STANDARD: UL 224 135°C & RoHS
SHRINK TEMP: 100°C ~140°C
WORK TEMP: -55°C~135°C
WALL TYPE: SINGLE
RATIO: 3:1
UL FILE: E197895